Check Points Of Every 100 Hours; Changing Engine Oil (For Standard Depth Oil Pans) - Kubota Z482-E2B Workshop Manual

SM-E2B SERIES, WSM

[5] CHECK POINTS OF EVERY 100 HOURS

Changing Engine Oil (for Standard Depth Oil Pans)

CAUTION
• Be sure to stop engine before changing engine oil.
1. Start and warm up the engine for approx. 5 minutes.
2. Place an oil pan underneath the engine.
3. To drain the used oil, remove the drain plug (2) at the bottom of
the engine and drain the oil completely.
4. Screw the drain plug (2).
5. Fill new oil up to upper line on the dipstick (1).
IMPORTANT
• When using an oil of different maker or viscosity from the
previous one, remove all of the old oil.
• Never mix two different types of oil.
• Engine oil should have properties of API classification CD/
CE/CF/CF-4/CG-4.
• Use the proper SAE Engine Oil according to ambient
temperature.
• Upon an oil change, be sure to replace the gasket with new
one.
Above 25 °C (77 °F)
0 °C to 25 °C (32 °F to 77 °F)
Below 0 °C (32 °F)
Oil pan depth
Models
*Z482-E2B
*D662-E2B
*D722-E2B
D782-E2B
Z602-E2B
D902-E2B
* 101 mm (3.98 in.) oil pan depth is optional.
Drain plug with
copper gasket
Tightening
torque
Drain plug with
rubber coated
gasket
(1) Dipstick
G-12
G GENERAL
SAE 30 or SAE 10W-30
SAE 10W-40
SAE 20 or SAE 10W-30
SAE 10W-40
SAE 10W or SAE 10W-30
SAE 10W-40
Engine oil capacity
101 mm (3.98 in.) 121 mm (4.76 in.)
2.1 L
0.55 U.S.gals 0.66 U.S.gals
3.2 L
0.85 U.S.gals 1.00 U.S.gals
–
0.95 U.S.gals
2.5 L
0.66 U.S.gals
3.7 L
0.98 U.S.gals
32.4 to 37.3 N·m
M12 × 1.25
3.3 to 3.8 kgf·m
23.9 to 27.5 ft-lbs
63.7 to 73.5 N·m
M22 × 1.5
6.5 to 7.5 kgf·m
47.0 to 54.2 ft-lbs
44.1 to 53.9 N·m
M22 × 1.5
4.5 to 5.5 kgf·m
32.5 to 39.8 ft-lbs
(2) Drain Plug
2.5 L
3.8 L
3.6 L
–
–
W1017548
KiSC issued 06, 2006 A