Assembling; Assembling Alternator - Kubota D1803-CR-E4 Workshop Manual

4. ENGINE
4. Loosen the lock nut.
5. Remove the 4 screws to detach the bearing retainer
(4).
(4) Bearing retainer
6. Temporarily install the nut on the pulley screw.
7. Detach the rotor (5).
(5) Rotor
8. When the rotor is detached, the 2 brushes are
found to stretch out of the shaft hole.
4-134
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
9. Lightly secure the rotor (5) with a vise to prevent
damage.
10. Remove the bearing (6) with a puller (7).
(5) Rotor
(6) Bearing

6. Assembling

6.1 Assembling alternator

1. Lightly secure the rotor with a vise to prevent
damage.
2. Install the bearing (2) to the slip ring side of rotor
(1).
(1) Rotor
SERVICING
6. Assembling
(7) Puller
(2) Bearing
KiSC issued 12, 2018 A