Replacing Dpf - Kubota D1803-CR-E4 Workshop Manual

4. ENGINE

7.58 Replacing DPF

Tools required
• Laptop computer (Diagmaster (software) installed)
• Interface (DST-i)
Removing DPF muffler full assembly
1. Remove the DPF muffler full assembly.
2. Disassemble the DPF assembly.
Installing DPF muffler full assembly
1. Assemble the DPF assembly.
2. Install the DPF muffler full assembly.
DPF regeneration interval time reset
1. Start "Diagmaster", then click the [Utility] button (1)
from the project window.
(1) Utility button
2. Select the "DPF Regeneration Interval Time Reset"
item (2), then click the [proceed] button (3).
(2) DPF Regeneration Interval
Time Reset item
3. Follow the instructions according to steps of
"Notes" screen (4), then click the [Start] button (5).
4-196
(3) Proceed button
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
(4) Notes screen
4. Click the [OK] button to exit function.
(6) OK button
DPF soot load reset
1. Start "Diagmaster", then click the [Utility] button (7)
from the project window.
(7) Utility button
2. Select the "DPF Soot Load Reset" item (8), then
click the [proceed] button (9).
SERVICING
7. Servicing
(5) Start button
KiSC issued 12, 2018 A