Removing Flywheel Housing; Removing Bearing Case Cover; Removing Crankshaft (For 3 Cylinders) - Kubota D1803-CR-E4 Workshop Manual

SERVICING
5. Disassembling
4. Remove the flywheel (3).
(3) Flywheel

5.38 Removing flywheel housing

1. Remove the flywheel housing (1).
(1) Flywheel housing

5.39 Removing bearing case cover

NOTE
• Before disassembling, check the side clearance
of crankshaft. Also check it after reassembling.
1. Remove the inner mounting screws of bearing case
cover (1).
2. Remove the external mounting screws of bearing
case cover (2).
NOTE
• The length that inner mounting screws of
bearing case
mounting screws of bearing case cover (2)
are different.
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
(4) Flywheel guide screw
cover (1) and external
(1) Inner mounting screw of
bearing case cover
3. Remove the bearing case cover (3).
(3) Bearing case cover
5.40 Removing crankshaft (for 3
cylinders)
NOTE
• Before you disassemble, measure the side
clearance of crankshaft. Measure it when you
assemble again.
• This topic is used for only 3 cylinders engine
(D1803-CR-E4, -TE4, -TIE4).
4. ENGINE
(2) External mounting screw of
bearing case cover
4-131
KiSC issued 12, 2018 A