Check Points Of Every 1 Year - Kubota WSM 07-E3B Series Workshop Manual

07-E3B SERIES, WSM

[10] CHECK POINTS OF EVERY 1 YEAR

Changing Engine Oil
CAUTION
• Be sure to stop engine before changing engine oil.
1. Start and warm up the engine for approx. 5 minutes.
2. Place an oil pan underneath the engine.
3. To drain the used oil, remove the drain plug (1) at the bottom of
the engine and drain the oil completely.
4. Screw the drain plug (1).
5. Fill new oil up to upper line on the dipstick (2).
IMPORTANT

• When using an oil of different maker or viscosity from the
previous one, remove all of the old oil.
• Never mix two different types of oil.
• Engine oil should have properties of API classification CF
(See page G-6).
• Use the proper SAE Engine Oil according to ambient
temperature.
Above 25 °C (77 °F)
0 °C to 25 °C (32 °F to 77 °F)
Below 0 °C (32 °F)
V2607-DI-E3B
V2607-DI-T-E3B
Engine oil capacity
V3007-DI-T-E3B
V3307-DI-T-E3B
Tightening torque Drain plug
(1) Drain Plug
(2) Dipstick
(3) Oil Filler Plug
Replacing Air Cleaner Element
1. Remove used air cleaner element.
2. Replace new air cleaner element.
NOTE

• The air cleaner uses a dry element. Never apply oil to it.
• Do not operate the engine with filter element removed.
G-27
G GENERAL
SAE 30 or SAE 10W-30
SAE 15W-40
SAE 20 or SAE 10W-30
SAE 15W-40
SAE 10W or SAE 10W-30
SAE 15W-40
10.2 L
2.69 U.S.gals
11.2 L
2.96 U.S.gals
45 to 53 N·m
4.5 to 5.5 kgf·m
33 to 39 lbf·ft
(a) Upper Line
(b) Lower Line
A : V2607-DI-E3B / V2607-DI-T-E3B
B : V3007-DI-T-E3B / V3307-DI-T-E3B
W1036031
W1020554
KiSC issued 06, 2020 A