Removing Water Pump; Removing Fan Drive Pulley; Removing Gear Case Cover; Removing Crankshaft Oil Slinger - Kubota D1803-CR-E4 Workshop Manual

4. ENGINE

5.24 Removing water pump

1. Remove the water pump (1).
(1) Water pump

5.25 Removing fan drive pulley

Tools required
• Flywheel stopper
• Gear puller
• 46 mm (1.8 in.) deep socket wrench
1. Mount a flywheel stopper (1) on the flywheel.
(1) Flywheel stopper
2. Remove the fan drive pulley mounting nut (2) with a
46 mm (1.8 in.) deep socket wrench (3).
3. Remove the fan drive pulley (4) with gear puller.
4-126
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
(2) Fan drive pulley mounting
nut
(3) 46 mm (1.8 in.) deep socket
wrench
4. Remove the feather key.

5.26 Removing gear case cover

1. Remove the hour meter gear case cover (if
attached).
2. Remove the gear case cover (1).
(1) Gear case cover

5.27 Removing crankshaft oil slinger

1. Remove the crankshaft collar (3).
SERVICING
5. Disassembling
(4) Fan drive pulley
KiSC issued 12, 2018 A