Replacing Fuel Hose And Clamps; Replacing Intake Air Line - Kubota D1803-CR-E4 Workshop Manual

CHECK AND MAINTENANCE
11.Check points of every 2 years
11.10 Replacing fuel hose and
clamps
1. Loosen the clamp (2) and remove the fuel hose (1).
(1) Fuel hose
2. Replace the fuel hose (1) and clamp (2) with new
ones.
3. Tighten the clamp (2) correctly.
4. After you replace the fuel hose and the clamp,
bleed the fuel system.

11.11 Replacing intake air line

IMPORTANT
• To prevent serious damage to the engine, keep
out dust in the intake air line.
1. Loosen the clamp (2).
2. Remove the intake air hose (1) and clamp (2).
(1) Intake air hose
3. Replace the intake air hose (1) and clamp (2) with
new ones.
4. Tighten the clamp (2) correctly.
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
(2) Clamp
(2) Clamp
3. MAINTENANCE
3-31
KiSC issued 12, 2018 A