Delete Igmp_Snooping Multicast_Vlan; Config Igmp_Snooping Multicast_Vlan_Group - D-Link DGS-1100-06/ME Cli Reference Manual

Restrictions
Example usage:
To configure the igmp snooping multicast VLAN:
DGS-1100-06/ME:5#config igmp_snooping multicast_vlan default state
enable
Command: config igmp_snooping multicast_vlan default state enable
Success!
DGS-1100-06/ME:5#

delete igmp_snooping multicast_vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To remove the igmp snooping multicast VLAN 'rd1':
DGS-1100-06/ME:5#delete igmp_snooping multicast_vlan rd1
Command: delete igmp_snooping multicast_vlan rd1
Success!
DGS-1100-06/ME:5#

config igmp_snooping multicast_vlan_group

Purpose
Syntax
Description
Parameters
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
source port for the multicast VLAN of IGMP snooping.
tag_member_port <portlist> − Specifies a port or a range of ports to
be the tagged port for the multicast VLAN of IGMP snooping.
state [enable | disable] − Enables/Disables IGMP Snooping multicast
VLAN.
replace_source_ip [none | <ipaddr>] −
Only administrator or operator-level users can issue this command.
To remove an IGMP snooping multicast VLAN on the Switch.
delete igmp_snooping multicast_vlan [<vlan_name 32> | all]
The delete igmp_snooping multicast_vlan command removes
IGMP snooping multicast VLAN on the Switch.
<vlan_name 32> − Specify the multicast vlan name to be removed
on the Switch.
all − Specify all multicast vlan names to be removed on the Switch.
Only administrator or operator-level users can issue this command.
To specify that IGMP snooping is to be configured for multicast vlan
groups on the Switch.
config igmp_snooping multicast_vlan_group <vlan_name 32>
[add | delete] ipv4_range <ipaddr>
The config igmp_snooping multicast_vlan_group command
specifies an IGMP snooping multicast VLAN group on the Switch.
vlan <vlan_name 32> − The name of the VLAN for which IGMP
snooping is to be configured. Up to 32 characters can be used.
[add | delete] − Specify whether to add or delete ports defined in the
following parameter <ipaddr>.
146