Save Log; Enable Syslog - D-Link DGS-1100-06/ME Cli Reference Manual

Parameters
Restrictions
Example usage:
To display the Switch history log:
DGS-1100-06/ME:5# show log
Command: show log
Index Time
------- ----------------------------- -------------------------------------------------------------------------------
1 Jan 1 00:00:18 2012:SYSTEM-2:System started up
DGS-1100-06/ME:5#

save log

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the Switch history log:

enable syslog

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
index <value 1-500> − The number of entries in the history log to
display.
module <string 32> − Specifies the module of log to be displayed.
severity [debug | informational | warning] − Specifies the severity
type to be displayed.
None.
Log Text
To save the Switch history log.
save log
The save log command saves the contents of the Switch's history
log.
None.
Only Administrator or operator-level users can issue this command.
DGS-1100-06/ME:5# save log
Command: save log
Success!
DGS-1100-06/ME:5#
To enable the system log to be sent to a remote host.
enable syslog
The enable syslog command enables the system log to be sent to a
remote host.
None.
Only Administrator or operator-level users can issue this command.
87