Show Ethernet_Oam Ports (Event Log) - D-Link DGS-1100-06/ME Cli Reference Manual

To show Ethernet OAM statistics on port 2:
DGS-1100-06/ME:5# show ethernet_oam ports 2 statistics
Command: show ethernet_oam ports 2 statistics
Port 2
------------------------------------------------------------------------
Information OAMPDU Tx
Information OAMPDU Rx
Unique Event Notification OAMPDU Tx : 0
Unique Event Notification OAMPDU Rx : 0
Duplicate Event Notification OAMPDU Tx: 0
Duplicate Event Notification OAMPDU Rx: 0
Loopback Control OAMPDU Tx
Loopback Control OAMPDU Rx
Variable Request OAMPDU Tx
Variable Request OAMPDU Rx
Variable Response OAMPDU Tx
Variable Response OAMPDU Rx
Organization Specific OAMPDUs Tx
Organization Specific OAMPDUs Rx
Unsupported OAMPDU Tx
Unsupported OAMPDU Rx
Frames Lost Due To OAM
DGS-1100-06/ME:5#

show ethernet_oam ports (event log)

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
Used to display Ethernet OAM event log.
show ethernet_oam ports [all | <portlist>] event_log {index
<portlist>}
The show ethernet_oam ports command is used to view ports
Ethernet OAM event log information. The Switch can buffer 1000
event logs. The event log is different from sys-log. It provides more
detailed information than sys-log. Each OAM event will be recorded
in both OAM event log and syslog. Specify an index to show a range
of events.
[all | <portlist>] – Specifies a range of ports or all ports to display
status.
index <portlist> – Specifies an index range to display.
None.
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
259