To enable the syslog function on the Switch:
disable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the syslog function on the Switch:
show syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current status of the syslog function:
create syslog host
Purpose
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
DGS-1100-06/ME:5#enable syslog
Command: enable syslog
Success!
DGS-1100-06/ME:5#
To disable the system log from being sent to a remote host.
disable syslog
The disable syslog command disables the system log from being
sent to a remote host.
None.
Only Administrator or operator-level users can issue this command.
DGS-1100-06/ME:5#disable syslog
Command: disable syslog
Success!
DGS-1100-06/ME:5#
To display the syslog protocol status.
show syslog
The show syslog command displays the syslog status (enabled or
disabled).
None.
None.
DGS-1100-06/ME:5#show syslog
Command: show syslog
Syslog Global State: Enabled
DGS-1100-06/ME:5#
To create a new syslog host.
88