Show Mac_Notification; Show Mac_Notification Ports - D-Link DGS-1100-06/ME Cli Reference Manual

To enable port 7 for MAC address table notification:

show mac_notification

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the Switch's MAC address table notification global settings:

show mac_notification ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all port's MAC address table notification status settings:
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
DGS-1100-06/ME:5#config mac_notification ports 7 enable
Command: config mac_notification ports 7 enable
Success.
DGS-1100-06/ME:5#
Used to display the Switch's MAC address table notification global
settings.
show mac_notification
The show mac_notification command is used to display the
Switch's MAC address table notification global settings.
None.
None.
DGS-1100-06/ME:5#show mac_notification
Command: show mac_notification
Global Mac Notification Settings
State : Enabled
Interval : 1
History Size : 1
DGS-1100-06/ME:5#
Used to display the Switch's MAC address table notification status
settings.
show mac_notification ports <portlist>
The show mac_notification ports command is used to display the
Switch's MAC address table notification status settings.
<portlist> − Specify a port or group of ports to be viewed.
Entering this command without the parameter will display the MAC
notification table for all ports.
None.
DGS-1100-06/ME:5#show mac_notification ports 1-5
Command: show mac_notification ports 1-5
138