Config Dscp_Mapping; Show Dscp_Mapping - D-Link DGS-1100-06/ME Cli Reference Manual

Parameters
Restrictions
Example usage:
To show the scheduling mechanism:

config dscp_mapping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the DSCP mapping with value 10 and priority high:
DGS-1100-06/ME:5# config dscp_mapping dscp_value 10 priority high
Command: config dscp_mapping dscp_value 10 priority high
Success
DGS-1100-06/ME:5#

show dscp_mapping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the DSCP mapping with value 10:
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
None.
None.
DGS-1100-06/ME:5#show scheduling_mechanism
Command: show scheduling_mechanism
QOS Scheduling_mechanism
scheduling_mechanism : Strict Priority
DGS-1100-06/ME:5#
To enable setting the DSCP User Priority
config dscp_mapping dscp_value <value 0-63> priority [high |
highest | low | medium]
The config dscp_mapping command enables mapping the DSCP
value (the priority) to a specific queue (the class_id).
<value 0-63> –The selected value of priority. The value may be
between 0 and 63.
[high | highest | low | medium] – Specifies the priority to be mapped.
Only administrator or operator-level users can issue this command.
To display the setting of DSCP mapping.
show dscp_mapping {dscp_value <value 0-63>}
The show dscp_mapping command displays the mapping of DSCP
value.
dscp_value <value 0-63> - The selected value of priority will be
dispalyed. The value may be between 0 and 63.
None.
112