Drive Tray Power-On Tool; Installation Kits; Special Installation Tools - Oracle StorageTek SL3000 Manual

1
Can be obtained from the SL8500 tool kit.
Table 2–11
Special Tools
Copper rail connector
extraction tool
Rail separator/joiner
Serial cable for laptop
Crossover cable for laptop

Drive tray power-on tool

Drive Tray Power-on Tool
A tool is available to assist in removing a stuck tape within a library tape drive. This
tool turns on a drive outside the library. The drive tray toolkit (part number
314831204) contains instructions and a drive power cable (part 419632401).
The tool is available from iProcurement under the Zones online tool crib.

Installation Kits

Installation kits are supplied with each module, and contain the hardware required to
install each module. Kit part numbers are:
419838301 — Base module
■
419844301 — DEM and CEM
■

Special Installation Tools

Part Number Use
313921001
4199410xx
24100134
24100163
314831204
An AC power cord is required to use this tool. You must
Note:
obtain a cord that is appropriate for your region.
Track terminator removal (obtain from Base installation kit)
Release or join extrusions (obtain from Base installation kit)
CLI access to library (obtain from iProcurement/Zones)
Ethernet access to library (obtain from iProcurement/Zones)
See "Drive Tray Power-on Tool"
from iProcurement/Zones)
Installation Tools
on page 2-11 below (obtain
Installation Planning 2-11