Config - Oracle StorageTek SL3000 Manual

config

Object
Done
COMPLETED
cleaning driveWarning set { on | off }
Sets the drive cleaning warning flag to either on or off.
on - the drive health status will be set to warn if it needs cleaning
■
off - the drive health status is not affected if the drive needs cleaning
■
config
This command will either display the current physical library configuration or set
library configuration parameters.
config
Displays help for the config command, the same as "help config".
config print
Displays the current physical library configuration.
config ilc print
Display the ilc status.
config ilc {enable | disable}
Enables or disables the Inter-Library Communications (ILC) LAN. If a disable is
requested, the library must first be taken offline using the "accessState offline <device
address>" command.
config print
Displays the current physical library configuration.
config serviceInfo print
Displays the library service information.
config serviceInfo set
Sets service information: contact 'contactName' phone 'phoneNumber' streetAddr
'streetAddress' city 'city' state 'state' country 'country' zip 'zipCode' description
'description data'.
The maximum string length is 31 characters. Each string must be delimited by ' '
(single quotes) to provide the ability to use spaces and other characters.
Example:
SL3000> config serviceInfo set city 'Denver' contact 'Andy' country 'USA'
description 'Manager' phone '303 222-4444' state 'C0' streetAddr '1 tape drive'
zip '80027'
requestId
requestId 1512402
Device serviceInfo
Success true
Done
Failure Count 0
Success Count 1
COMPLETED
A-6 StorageTek SL3000 Library Guide
Success true