Access Expansion Module (Aem); Dual Robotics; Module Add-Ons; Tape Drive Arrays - Oracle StorageTek SL3000 Manual

Purchase activation permits to activate storage capacity in this module (see
■
"Capacity Activation"

Access Expansion Module (AEM)

AEMs can provide bulk loading and dual robotics support. AEMs can only be placed
at the ends of the library. An AEM cannot be placed directly to the left of the Base
module; there must be a module in between.
AEM Part Number Descriptions
Left AEM, 234 bulk loading CAP
Left AEM, 234 bulk loading CAP for non-EU countries
Right AEM, 234 bulk loading CAP
Right AEM, 234 bulk loading CAP for non-EU
countries
Options:
One AEM supports bulk loading capability only; dual robotics is not supported.
■
Oracle recommends installing a single AEM on the left for maximum storage slot
capacity.
Two AEMs support bulk loading and dual robotics.
■

Dual Robotics

Dual robotics requires either two PEMs or two AEMs and a minimum 2N power with
240 VAC.
Dual Robotic Part Number Descriptions
Dual robot
Dual robot for non-EU countries

Module Add-ons

Tape Drive Arrays

■
Cartridge Access Ports
■
Window Cartridge Array
■
Local Op Panel
■
Redundant Electronics
■
Tape Drive Arrays
You can order up to two additional drive arrays for the Base module and up to three
arrays for the DEM.
Tape Drive Array Part Number Description
Tape Drive Array (eight drive slots)
Tape Drive Array (eight drive slots) for non-EU
countries
on page 1-29).
Some options are only compatible with a specific module.
Note:
ATO PTO
SL3000-LEFTAEM-Z XSL3000-AEM-LFT-N
7114506 7114532
SL3000-RIGHTAEM-Z XSL3000-AEM-RT-Z-N
7114507 7114533
ATO PTO
SL3000-DUALBOT-Z XSL3000K-DUALBOT-N
7114511 7114536
ATO PTO
SL3000-DRVARRAY-Z XSL3000-DRVARY-Z-N
7114512 7114537
Library Overview 1-25
Ordering