Locating A Cartridge; Locating A Cartridge By Volume Id; Locating A Cartridge By Address - Oracle StorageTek SL3000 Manual

Locating a Cartridge

Click the RcvrMove tab.
2.
Select the Source Location Mode:
3.
■
■
Select the Destination Location type (CAP, Storage Slots, Drive, and Reserved
4.
Slots) and select the destination address.
Click Start.
5.
Initiate a library audit from the host software to update the host database (see the
6.
tape management software documentation).
Locating a Cartridge
You can search for cartridges by volume ID, internal library address, or host address.
To view a table of all cartridges in the library, see
page 11-4.

Locating a Cartridge by Volume ID

Select Tools > Diagnostics, and then click the Library in the device tree.
1.
Click the Search tab.
2.
Select VOLID.
3.
Enter the volume ID (use * as a wildcard).
4.
From the Requester drop-down list, select the format for the search results:
5.
■
■
Select the Cartridge Type.
6.
Click Search.
7.

Locating a Cartridge by Address

Select Tools > Diagnostics, and then click the Library in the device tree.
1.
Click the Search tab.
2.
Select Location.
3.
Select the search criteria from the drop-down list, and enter the address (wildcards
4.
are invalid).
From the Requester drop-down list, select the type of address you entered in the
5.
Location field.
Click Search.
6.
11-2 StorageTek SL3000 Library Guide
For VOLID, enter the vol-id of the cartridge to move.
For Location, select the cartridge's current location (CAP, Slot, Drive,
Reserved Slots).
Only select Drive if the source is a CAP or reserved slot.
Note:
Do not move data cartridges into reserved slots. Reserved slots should
only contain diagnostic or cleaning cartridges.
default to display in library internal address format.
hli0 or hli1 to display in HLI-PRC address format.
"Viewing Cartridge Information" on