Changing Online/Offline Status And Rebooting; Taking The Library Offline - Oracle StorageTek SL3000 Manual

Changing Online/Offline Status and Rebooting

16

Taking the Library Offline

■
Bringing the Library Online
■
Taking a Device Offline
■
Bringing a Device Online
■
Rebooting the Local Operator Panel
■
Rebooting an AEM Safety Door
■
Rebooting the Library
■
Taking the Library Offline
Take all library drives offline (see
1.
In SLC, select Tools > System Detail.
2.
Select the Library folder in the device tree.
3.
Click the Status tab, and then the General tab.
4.
In the Transition Request field, click Take offline.
5.
Click Apply. Before the library goes offline, all outstanding library jobs complete.
6.
Wait for the offline confirmation message. If the library does not go offline, check
7.
the status of the library (see
When to place the library offline:
Before powering down the library
■
Before opening a library access door
■
When the library is inoperative and requires maintenance
■
Note: Always attempt to take the library offline with ACSLS or ELS
tape management software before using SLC.
"Taking a Device Offline"
"Viewing Library Operational Status"
Changing Online/Offline Status and Rebooting 16-1
16
on page 16-2).
on page 14-1).