Partition - Oracle StorageTek SL3000 Manual

network netmask <netmask>
Sets the external network netmask in xxx.xxx.xxx.xxx form.
network print
Displays the current network configuration for the external Ethernet ports (2A and
2B).

partition

This command displays the current status or disables the partition feature.
partition
Displays help for the partition command, same as "help partition".
partition autoClean set { * | <Partition Id> }
Set auto clean in a specified partition (0, for a non-partitioned library).
partition attribute status { * | <Partition Id> }
Displays the status attributes of a single specified partition or all partitions.
partition fastLoad set '<partitionId-mode, partitionId-mode, ...>'
Sets the fastLoad mode for a one or more specified partitions. Currently the only valid
modes are true or false. This command is only available on the SL3000.
Example:
SL3000> partition fastload set '1-true,3-false'
requestId
requestId 40901
Attributes Success true
Object
Done
Failure Count 0
Success Count 2
COMPLETED
partition getCapacity
Displays the capacity values for library or any defined partitions.
partition get state <Partition Id>
Displays the current state of the specified partition(s). This command is available on
SL3000 libraries only
partition predefined file <partition file number>
Uses a predefined partition text file to set the library partition configuration. Each file
name consists of the word "partition" and a numeric value ie "2" and a ".txt"
extension. The predefined files are below.
partition1.txt – Non-partitioned Base with a HLI interface.
partition2.txt – Non-partitioned Base with a SCSI interface.
partition3.txt – One partitioned Base with a HLI interface.
partition4.txt – One partitioned Base with a SCSI interface.
partition5.txt – Two partitioned Base with a HLI interface.
partition6.txt – Two partitioned Base with a SCSI interface.
partition7.txt – Two partition Base w/DEM HLI and SCSI partitions.
partition8.txt – Two partition Base w/DEM SCSI interface.
partition9.txt – Multiple partitions (stripes) HLI interface.
partition10.txt – Multiple partitions (stripes) SCSI interface.
Command Line Interface Reference A-11
partition