Network - Oracle StorageTek SL3000 Manual

mediaValidation
Displays help for the mediaValidation command, same as "help mediaValidation"
mediaValidation print { all | poolOnly } { * | @ }
Displays drive locations of the media validation pool.
all - lists all drive slots
■
poolOnly - lists only drive slots in the media validation pool
■
* - displays only information for the target library
■
@ - displays information for the entire complex
■
mediaValidation reservation clear <drive address>
Clears media validation reservation for specified drive.
<drive address> - specifies the drive in library, rail, column, side, row format.
■
mediaValidation stopValidation <drive address>
Stops a validation currently in progress. Cartridge is returned to source storage slot.
<drive address> - specifies the drive in library, rail, column, side, row format.
■

network

This command configures and displays network configuration for the controller card.
network clone [Port 2B IP address] [Port 2A IP address]
Used for redundant electronics configuration. Copies all port, routing, and IP policy
configurations to side B HBC. IP addresses are replaced with the ones specified in the
command for side B. If no port IP address is specified, then they are not set on side B.
network config print
Displays the target library side (A or B) that is set for network commands.
network config side {a | b}
Sets the target library side for network commands.
network config clear
Clears the network configuration. This command stops network connectivity.
Reconfiguration requires access to the serial port on the HBC card.
network export
Exports library network configuration file (.lnc) and generates a network configuration
script (.scr). It can only be used in cases where no prior network configurations have
been set.
network gateway <IP address>
Sets the external network default gateway.
network gateway clear
Clears the external network default gateway.
network import
Imports a library network configuration file (.lnc).
network ip <IP address>
Sets the IP address of port 2B.
Command Line Interface Reference A-9
network