Managing Cartridges; Moving Cartridges (Recovery Moves) - Oracle StorageTek SL3000 Manual

Moving Cartridges (Recovery Moves)

■
Locating a Cartridge
■
Importing/Exporting Diagnostic and Cleaning Cartridges
■
Defining Cleaning Cartridge Usage Count Warning Thresholds
■
Configuring the Barcode Format for FC-SCSI Hosts
■
Viewing Cartridge Information
■
Viewing Cleaning Cartridge Status
■
Using Reserved System Slots
■
Cartridge Types
■
Cartridge Handling
■
See Also
"Entering Cartridges Using a CAP"
■
"Ejecting Cartridges Using a CAP"
■
"Resolving Orphaned Cartridges Caused by Capacity Changes"
■
"Resolving Orphaned Cartridges Caused by Partitioning Changes"
■
Moving Cartridges (Recovery Moves)
Moving a cartridge using SLC only updates the cartridge's location in the library
controller database. You must perform an audit from the host software to update the
host database to prevent mount failures.
To view a table of all cartridges in the library, see
page 11-4.
Select Tools > Diagnostics. Click the Library in the device tree.
1.
To avoid data loss, use caution when moving cartridges in
Caution:
partitioned libraries. Accidentally moving a cartridge from one
partition to another will orphan the cartridge and the new partition
may treat it as a scratch cartridge.

Managing Cartridges

11
on page 10-2
on page 10-2
"Viewing Cartridge Information"
Managing Cartridges 11-1
11
on page 6-3
on page 7-5
on