Committing Partitioning Changes; Viewing Current Partition Allocations; Partitioning Caps - Oracle StorageTek SL3000 Manual

Viewing Current Partition Allocations

SLC Icon
(yellow rectangle)
(red rectangle)
(gray rectangle)

Committing Partitioning Changes

You must complete these procedures to make changes to the library.
Take the library offline to the host (see your host software documentation).
1.
Click the Commit (Step 4) tab of the Partitions interface.
2.
Click Apply.
3.
Configure all affected library host applications (see the host software
4.
documentation and
Viewing Current Partition Allocations
See also
Select the Tools > Partitions > Module Map (Step 3a) tab.
1.
Click a module to display.
2.
Click the Current Partition Definitions tab. Hover over a resource to display
3.
detailed information.

Partitioning CAPs

7-4 StorageTek SL3000 Library Guide
Description
Partition # — resources assigned to the current partition
Other Partitions — resources assigned to another partition
Shared CAP — a CAP assigned to multiple partitions
To prevent configuration conflicts, you should make the
Note:
library unavailable to other users and stop all host operations before
committing partitioning changes.
If the Apply button is grayed out, the library capacity is
Note:
over-subscribed. Remove storage slots from a partition or purchase
more capacity.
If there are warnings, click Details >> and perform
Caution:
recovery moves on the orphaned cartridges (see
(Recovery Moves)" on page 11-1).
"Updating Hosts After Modifying Partitioning"
"Viewing Partitioning Reports"
AEM CAPs are subject to the same partitioning rules and
Note:
restrictions as rotational CAPs. The term CAP refers to both types of
CAPs, unless otherwise specified.
"Moving Cartridges
on page 15-2.
on page 8-2).