Changing The Partition Interface Type; Changing Fc-Scsi Host Connection Information; Allocating Resources To A Partition - Oracle StorageTek SL3000 Manual

Changing the Partition Interface Type

Select the Tools > Partitions > Summary (Step 2) tab.
1.
In the Partition Allocation Summary area, select the partition to modify.
2.
Click Modify Partition.
3.
Proceed to
4.

Changing FC-SCSI Host Connection Information

Select the Tools > Partitions > Summary (Step 2) tab.
1.
In the Connections section, select the host-partition connection to modify.
2.
Click Modify a Connection.
3.
Proceed to
4.

Allocating Resources to a Partition

Select the Tools > Partitions > Module Map (Step 3a) tab.
1.
Select a module, and then click the Design (Step 3b) tab.
2.
Select a partition ID from the drop-down list.
3.
In the Select by drop-down list, select a range. Then, select Add or Remove.
4.
Use the library map to select the resources to add or remove. Partitions can be
5.
non-contiguous.
Repeat for each partition ID. When you complete the partition design, click Verify.
6.
If there are no warnings, proceed to see
7.
page 7-4.
Partitioning Icons
SLC Icon
(rectangle with X)
(white rectangle)
Changing the interface type can result in loss of active host
Caution:
connections or existing shared CAP assignments.
"Committing Partitioning Changes"
"Committing Partitioning Changes"
To re-assign a resource from one partition to another, you must
Note:
remove the resource from the initial partition before re-allocating it.
If there are warnings, click Details >> and perform
Caution:
recovery moves on the orphaned cartridges (see
(Recovery Moves)" on page 11-1). Then re-verify the design.
Description
Not Accessible — resources not available for host operations
(reserved system slot, physically blocked, and so on).
Unallocated — resource available for assignment
Partitioning the Library Using SLC
on page 7-4.
on page 7-4.
"Moving Cartridges
"Committing Partitioning Changes"
Partitioning the Library 7-3
on