Viewing The Local Operator Panel Type; Meaning Of Slc Library And Device Status Indicators - Oracle StorageTek SL3000 Manual

Drive Status
Ready
NotCommunicating
rewindUnload
Redundant Electronics Card Status
hbca — Library controller, A (bottom) slot
■
hbcb — Library controller, B (top) slot
■
hbta —Drive controller, A (bottom) slot
■
hbtb — Drive controller, B (top) slot
■
Card Status
Duplex: Software ready,
switch possible
Not installed
Ok
Pre-standby: software
not ready
Standby: software ready

Viewing the Local Operator Panel Type

In SLC, select Tools > Diagnostics.
1.
Select the Library in the device tree, and then click the OpPanel tab.
2.
The type is listed at the bottom of the screen. A W indicates Windows-based and a
DL or OL indicates Linux-based.

Meaning of SLC Library and Device Status Indicators

SLC Icon Definition
Health Status of a Device
This information is found in the device tree of the System Details and Diagnostics
page.
Normal — library device is functioning normally
■
Warning — device is offline or operating in a degraded state
■
Error — device has experienced a failure
■
Meaning
Cartridge is loaded.
Controller card cannot communicate with the drive.
Drive is busy rewinding and unloading.
Meaning
Active library controller is functioning normally.
Card is not installed in the library.
Active or standby drive controller card is functioning normally.
Standby library controller card is loading standby code and is not
ready to be used in an automatic failover or manual switch.
Standby library controller card is functioning normally and can be
used for an automatic failover or manual switch.
Normal
Warning
Error
Meaning of SLC Library and Device Status Indicators
Viewing Library and Device Information 14-3