Changing the Host Interface Type of a Non-Partitioned Library
■
Updating Hosts After Modifying Capacity
■
Updating Hosts After Modifying Partitioning
■
Updating Hosts After Modifying the MV Pool
■
Updating HLI Host Management Software for RE
■
Configuring Dual TCP/IP
■
See Also
"Enabling HLI Host Managed Drive Cleaning"
■
"Configuring the Barcode Format for FC-SCSI Hosts"
■
Changing the Host Interface Type of a Non-Partitioned Library
Select Tools > Select Active Cells.
1.
Click the Select Active Cells tab.
2.
Select the interface type.
3.
Click Apply, and then Yes to update the library controller database.
4.
The new interface type is active immediately. You do not need to start the library.
Updating Hosts After Modifying Capacity
Updating ACSLS and ELS After Modifying Capacity
■
Updating SCSI Hosts After Modifying Capacity
■
See also:
■
Updating ACSLS and ELS After Modifying Capacity
Initiate an audit through ACSLS and ELS to update the host database (see the host
software documentation).
Configuring Host Applications
8
For a partitioned library, see
Note:
Type"
on page 7-3.
"Configuring Capacity"
on page 9-2
on page 11-4
"Changing the Partition Interface
on page 6-1 to modify capacity
Configuring Host Applications 8-1
8