Table of Contents
Advertisement
8. Remove the PCI riser card from the PCI riser-card assembly.
9. If you are instructed to return the PCI riser card, follow all packaging
Installing a riser card from the PCI riser-card assembly
To install a PCI riser card, complete the following steps:
1. Touch the static-protective package that contains the new PCI riser card to any
2. Align the screw holes on the PCI riser card with the screw holes on the PCI
154
IBM System x3630 M3 Type 7377: Problem Determination and Service Guide
instructions, and use any packaging materials for shipping that are supplied to
you.
unpainted metal surface on the server. Then, remove the ServeRAID controller
from the package.
riser-card assembly. Make sure the locating pins engages the PCI riser card.
The following illustration shows how to install PCI riser card 1 on the PCI
riser-card assembly:
Advertisement
Table of Contents
