Server Controls, Leds, And Connectors; Front View - IBM x3630 M3 7377 Problem Determination And Service Manual

Sleep mode power (watts):
v Not applicable for servers.
Off mode power (watts):
v 15
Noise levels (the declared A-weighed sound power level of the computer):
v See "Features and specifications" on page 7.
Test voltage and frequency:
v 230V / 50 Hz or 60 Hz
Total harmonic distortion of the electricity supply system:
v The maximum harmonic content of the input voltage waveform will be equal or
Information and documentation on the instrumentation set-up and circuits
used for electrical testing:
v ENERGY STAR Test Method for Computer Servers; ECOVA Generalized Test
Measurement methodology used to determine information in this document:
v ENERGY STAR Servers Version 2.0 Program Requirements; ECOVA

Server controls, LEDs, and connectors

This section describes the controls, light-emitting diodes (LEDs), and connectors.

Front view

The following illustration shows the controls, connectors, and hard disk drive bays
on the front of the server.
Drive bay 1
Drive bay 2
USB connectors: Connect a USB device, such as USB mouse or keyboard to
either of these connectors.
10
IBM System x3630 M3 Type 7377: Problem Determination and Service Guide
less than 2%. The qualification is compliant with EN 61000-3-2.
Protocol for Calculating the Energy Efficiency of Internal Ac-Dc and Dc-Dc Power
Supplies.
Generalized Test Protocol for Calculating the Energy Efficiency of Internal Ac-Dc
and Dc-Dc Power Supplies.
USB 1 USB 2
Drive bay 0
connector connector
Drive bay 4 Drive bay 5
Drive bay 3 Drive bay 6 Drive bay 9
Drive bay 7 Drive bay 8 Drive bay 10
Hard disk drive
activity LED (green)
Hard disk drive
status LED (amber)
Power control
button
Power supply
LED
Hard disk drive
activity LED (front panel)
Locator LED
System error
LED
Drive bay 11