IBM x3630 M3 7377 Problem Determination And Service Manual page 182

v 1.35V DIMMs are only supported on server models with an Intel Xeon
v If you install a ServeRAID-M1015 SAS/SATA adapter, make sure at least 2 GB of
v Do not install 1.5V DIMMs and 1.35V DIMMs in the same server.
DIMM installation sequence
The server requires at least one DIMM per microprocessor. Depending on the
server models, the server may come with one 2 GB RDIMM or 4 GB RDIMM, or
three 4 GB RDIMMs.
When you install additional DIMMs, install them in the order shown in "DIMM
installation sequence," to maintain performance.
164
IBM System x3630 M3 Type 7377: Problem Determination and Service Guide
dual-rank, and quad-rank DIMM in the server, install the quad-rank DIMM first in
DIMM connector 8 (for microprocessor 1) or DIMM connector 16 (for
microprocessor 2).
series microprocessor.
memory is installed in the server before you run DSA from a bootable CD.
Table 11. Non-mirroring (normal) mode DIMM installation sequence
Microprocessors installed
1
2
DIMM connector population sequence
3, 6, 8, 2, 5, 7
3, 11, 6, 14, 8, 16, 2, 10, 5, 13, 7, 15,
™
5600