Table of Contents
Advertisement
10. Perform any configuration tasks that are required for the adapter.
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 89.
Installing a ServeRAID adapter on the PCI riser-card assembly
To install a ServeRAID adapter on the PCI riser-card assembly, complete the
following steps:
64
System x3630 M4 Type 7158: Installation and User's Guide
v For 1U PCI riser-card assembly 2:
Note: For 1U PCI riser-card assembly 2, it only supports ServeRAID
adapters (see "Installing a ServeRAID adapter on the PCI riser-card
assembly").
8. Connect any required cables to the adapter.
Attention:
v When you route cables, do not block any connectors or the ventilated space
around any of the fans.
v Make sure that cables are not routed on top of components that are under
the PCI riser-card assembly.
v Make sure that cables are not pinched by the server components.
9. Install the PCI riser-card assembly (see "Installing the PCI riser-card assembly"
on page 90).
1. Read the safety information that begins on page vii and "Installation guidelines"
on page 35.
2. Make sure that the server is turned off, all external cables and power cords are
disconnected, and the cover has been removed.
3. If you are installing a new or replacement ServeRAID adapter, touch the
static-protective package that contains the new ServeRAID adapter to any
unpainted metal surface on the server. Then, remove the ServeRAID adapter
from the package.
Hide quick links:
Advertisement
Table of Contents
