6. If you are instructed to return the backplane, follow all packaging instructions,
Installing the fan to the optional rear hard disk drive cage
To install the replacement fan to the optional rear hard disk drive cage, complete
the following steps:
1. Orient the new fan over its position in the fan bracket. Make sure that the fan
2. Reconnect the fan cable to the fan board.
3. Install the cover (see "Installing the cover" on page 146).
4. Reconnect the external cables; then, reconnect the power cords and turn on the
220
IBM System x3630 M3 Type 7377: Problem Determination and Service Guide
and use any packaging materials for shipping that are supplied to you.
cable is on the cave of the fan bracket and the 4 rubber grommets are on the
slots of the fan bracket as well.
peripheral devices and the server.
2
1
1
2