IBM x3630 M3 7377 Problem Determination And Service Manual page 27

Table 1. Features and specifications (continued)
Electrical input with hot-swap ac power
supplies:
v Sine-wave input (50 - 60 Hz) required
v Input voltage range automatically
selected
v Input voltage low range:
– Minimum: 100 V ac
– Maximum: 127 V ac
v Input voltage high range:
– Minimum: 200 V ac
– Maximum: 240 V ac
v Input kilovolt-amperes (kVA)
approximately:
– Minimum: 0.22 kVA
– Maximum: 0.78 kVA
EU Regulation 617/2013 Technical Documentation:
International Business Machines Corporation
New Orchard Road
Armonk, New York 10504 http://www.ibm.com/customersupport/
For more information on the energy efficiency program, go to http://www.ibm.com/
systems/x/hardware/energy-star/index.html.
Product Type:
v Computer Server
Year first manufactured:
v 2010
Internal/external power supply efficiency:
v http://www.plugloadsolutions.com/psu_reports/IBM_7001578-XXXX_675W_SO-
v http://www.plugloadsolutions.com/psu_reports/ACBEL_FS9032-000G_675W_SO-
Maximum power (watts):
v See "Features and specifications" on page 7.
Idle state power (watts):
v 234
Size:
v 2U
v Height: 86.5 mm (3.406 in.)
v Depth:
– EIA flange to rear: 719.39 mm
(28.32 in.)
– Overall: 749.39 mm (29.5 in.)
v Width:
– With top cover: 447 mm (17.598 in.)
– With front bezel: 487.995 mm
(19.212 in.)
v Weight: approximately 16.20 kg (35.64
lb) to 29.20 kg (64.24 lb) depending on
your configuration
System fans: Up to four
Hot-swap power supplies (depending
on the model):
v Up to two hot-swap power supplies for
redundancy support
– 675-watt ac
– 675-watt high-efficiency ac
Note: You cannot mix high-efficiency and
non-high-efficiency power supplies in the
server.
485_Report.pdf
210_Report.pdf
Acoustical noise emissions:
v Declared sound power, idle: 6.6 bel
v Declared sound power, operating: 6.6 bel
Heat output:Approximate heat output:
v Minimum configuration: 762 Btu per hour
(223 watts)
v Maximum configuration: 2662 Btu per
hour (780 watts)
Chapter 2. Introduction
9