Connector And Its Functions Of The Control Box - JUKI ACF-164-1903 Engineer's Manual

(2) Connector and its functions of the control box

J41
(4pin)
J42
(20pin)
J43
(14pin)
J44
(16pin)
J45
(12pin)
J61
(6pin)
J62
(8pin)
< Input >
J31 (34 pin) : Each sensor signal of the machine and the BR body is entered.
J32 (50 pin) : Each sensor signal of the machine and the BR body is entered.
J34 (30 pin) : Not used.
J35 (40 pin) : The sensor signal of the indexer is entered.
J37 (7 pin) : Not used.
< Output >
J41 (4 pin) : A control signal is output to the feeder for oscillating.
J42 (20 pin) : A signal is output to the magnet, motor and valve for driving the machine head and the BR
body.
J43 (14 pin) : A signal is output to the valve for driving the machine head.
J44 (16 pin) : A signal is output to the valve for driving the indexer.
J45 (12 pin) : Not used.
J33 (2 pin) : A signal is output external counter (optional).
J61 (6 pin) : A signal is output to the stepping motor.
J62 (8 pin) : The power (100 VAC) is supplied to the feeder. A signal is output to the motor for driving
the conveyer.
J63 (4 pin) : Not used.
J64 (2 pin) : 4.5 VAC is supplied to the marking light (optional).
J65 (2 pin) : 4.5 VAC is supplied to the marking light (optional).
J66 (4 pin) : Not used.
90
− −
J31
(34pin)
J32
(50pin)
J66
(4pin)
J33
(2pin)
J35
(40pin)
J34
(30pin)
J37
(7pin)
J63
(4pin)
J64
(2pin)
J65
(2pin)