Table of Contents
Advertisement
4) Counter settings
Specify the initial values for the shirt counter and bobbin thread counter.
Shirt counter
Bobbin thread counter : The counter subtracts one (1) from the value after one button is finished.
(Example) The initial value for the shirt counter : 0 (The counter starts counting from the 1st shirt finished.)
The initial value for the bobbin thread counter : 400 (400 buttons can be sewn. Under the automatic
operation, the machine finishes 80 pieces of shirt each of which has five buttons and then
automatically stops. If sewing six buttons on each of shirt, the machine finishes 66 pieces of shirt
(6 buttons x 66 = 396 buttons) and automatically stops with the button thread to sew four buttons
remained.)
1
N o .
1
B U T T O N = 5 p s
S H I R T
Press
so that the LED lights up. (
2
•
•
•
•
•
Input the initial value for the shirt counter.
3
•
•
•
•
•
Input the initial value for the bobbin counter.
4
N o .
1
B U T T O N = 5 p s
S H I R T
This completes the data input for the counter settings.
＊ The following switch operations are valid when inputting data.
Increase the number specified.
Decrease the number specified.
The previous indication display is restored.
The indication display is scrolled forward.
Note that if any of these switches is pressed when the data for the bobbin thread counter in step 3 is being
inputted, the initial value for the shirt counter in step 2 is entered. Consequently, if you wish to change only
the shirt counter, be sure to press the (
＊ The initial value "0" for the shirt counter can be set by pressing the
is waiting for the next operation).
＊ The initial value (set value) for the bobbin thread counter can be restored by pressing the
(only when the machine is waiting for the next operation).
: The counter adds one (1) to the value after one shirt is finished.
C O U N T = 0
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C O U N T = 0
−
I N D E X < 1 →
2 >
B O B B I N
)
D A T A
INPUT • • • • • • • • • • • •
S H I R T
D A T A
INPUT • • • • • • • • • • • •
B O B B I N
I N D E X < 1 →
2 >
B O B B I N
Return to the previous number.
Delete the input data.
(
) Delete the input data.
) switch before step 3 as stated above.
33
−
=
1 0 0 . 0 m m
C O U N T = 4 5 0
C O U N T E R = 0
C O U N T E R = 4 0 0
=
1 0 0 . 0 m m
C O U N T = 4 0 0
switch (only when the machine
switch
Advertisement
Table of Contents
