Table of Contents
Advertisement
2) Changing to the other sewing pattern
READY
SELECT
3) Performing sewing using the function keys (
If the patterns (No. 1 to 99) which have been already registered are registered in P1 to P7, the pattern calling
can be made by one-touch without performing the selection by the pattern No. scrolling.
＊ When selecting P4, P5, P6 or P7, the selection can be made by the combination of
P1 : Press the
P2 : Press the
P3 : Press the
1 Registration to the function key
Setting example : Register the following setting to the P1.
Pattern No. 3, X Scale rate : 50%, Y Scale rate : 80%, Max. sewing speed limitation : 2,000 rpm
1) Pressing the
SELECT
P 1
2) Press the
key.
3) Press the
key to indicate the PATTERN No.
SELECT
Set the pattern No. to Pattern No. "
4) Press the
key, ans set X scale rate to 50%, Y Scale
SELECT
rate to 80% and Max. sewing speed limitation to 2,000 rpm
using the
or
FORWARD
5) Press the
key to finalize the registration.
READY
＊ If you desire to register in P2 to P7, select P2 to P7 in combination of
and perform the steps 3) to 5).
6) When the registration has been completed, turn OFF the power switch, and again turn ON the powr
switch. Then the sewing machine can be used as usual.
PATTERN No.
X SCALE
Y SCALE
SPEED
COUNTER
WINDER
FORWARD
P 1
key.
P4 : Simultaneously press the
P 2
key.
P5 : Simultaneously press the
P 3
key.
P6 : Simultaneously press the
P7 : Simultaneously press the
key, turn ON the power switch.
" using the
key.
BACK
1 Press the
key. (The sewing LED will go off.)
READY
2 Press the
SELECT
No.".
3 Set the items 2 through 6 of 1) setting the item
data, and move to the step of "5) Checking the
contour of a sewing pattern".
BACK
,
P 2
and
keys)
P 1
P 3
P 1
P 1
P 2
P 1
or
key.
FORWARD
BACK
13
−
−
key to indicate the item "PATTERN
P 3
P 1
to
P 2
and
keys.
P 3
and
keys.
P 3
and
keys.
P 2
P 3
,
and
keys.
e
e
e
e
P 1
P 3
to
keys at the step 2),
keys.
Advertisement
Table of Contents
