Table of Contents
Advertisement
(4) Operation
3
1) Automatic operation
When the start switch is pressed, the following series of operation will be performed automatically.
[Series of operations for men's wear]
Start
Stacking
[Series of operations for ladies' wear]
Start
Stacking
[Series of operations for finished product]
Start
The clamp of the
carriage is
released.
[How to operate]
1 Operate the
and
up. (
LED : ON
2 Properly set the material on the carriage.
3 Press knee switch 3, and the work clamp feet at both ends of material come down. Release the knee
switch, then the sewing machine starts sewing.
＊ If you press hand switch 4 before the knee switch has been released, the work clamp feet at the both
ends of material go up and the sewing machine is released from its starting state.
The proper material setting
1) Men's shirts (See P.6.)
Place the material so that there is no clearance between
the side end of material and the pressing board 1, and
align the top end of the material with marker 2.
2
2
4
5
1
Carry the material to the
carriage so that it is clamped.
Button sewing
(last button)
The carriage
returns to its
home position.
Carry the material to the
carriage so that it is clamped.
The carriage
returns to its
home position.
Carry the material to the
carriage so that it is clamped.
The carriage
returns to its
home position.
switches on the operation panel so that the LED on the left-hand side lights
LED : OFF)
1
−
1 Power switch
2 Operation panel
3 Knee switch
4 Hand switch
5 Emergency stop switch
Button
Index (the carriage shifts)
sewing
Index
Button
Index (the carriage shifts)
sewing
Button sewing
Index
(last button)
Button
Index (the carriage shifts)
sewing
Button sewing
Index
(last button)
2) For ladies' shirt (See P.7.)
Place the material so that there is no clearance between
the side end of material and the pressing board 1, and
align the top end of the material with marker 3.
34
−
Button
sewing
Button
sewing
Button
sewing
3
1
Advertisement
Table of Contents
