Table of Contents
Advertisement
2) Manual operation
Use the manual operation mode to perform each step of operation manually for jump sewing, etc.
[How to operate]
1) Press the
)
2) Set the material, following the same procedure as that for the automatic operation mode.
3) Depress the knee switch, and the work clamp feet come down.
Use the following switches described below to go on the next step of operations to be carried out.
: The carriage travels to the left in a single step.
1 When sewing a men's shirt body, the material is stacked after the carriage has reached its
leftmost position and the the carriage will return to its origin.
2 When sewing a finished product of men's wear, the carriage will finally return to its origin and
the clamp on the carriage will be released.
: The carriage travels to the right in a single step.
1 When sewing a ladies' shirt body, the carriage will finally return to its origin and then the
material will be stacked.
2 When sewing a finished product of ladies' wear, the carriage will finally return to its origin and
the clamp on the carriage will be released.
: The sewing machine is actuated.
Knee switch : The operation mode changes from manual to automatic during sewing by depressing the
knee switch.
＊ If the operation mode is changed from manual to automatic during sewing, the machine performs a
series of operation in the oder of sewing machine actuation to the button sewing → index . Be careful
not to sew two buttons at the same position.
3) Independent operation
Use the independent operation mode to perform each operation step independentlyfor trial sewing or checking
the travel of the carriage.
[Operation]
™ Operate switches
Now, each operation step can be performed independently using the switches described below.
: The carriage travels to the left when the carriage has been adjusted for men's wear or it travels to
the right when it has been adjusted for the ladies's wear in a single step.
(Finally, the carriage returns to the origin.)
: The sewing machine is actuated.
Example) Trial sewing
1 Place the workpiece for trial sewing under the work clamp.
2 Press
to actuate the sewing machine.
and
switches on the operation panel so that both LED's light up. (Both light up.
and
so that both LED's go out. (LED OFF
35
−
−
)
Advertisement
Table of Contents
