Table of Contents
Advertisement
4. OPERATION OF LK
(1) NAMES ON THE operation BOX OF LK
• Ready key
• Function key
• ＋ /Forward key
• − /Back key
• Selection key: Every time this key is pressed, the selection
(2) HOW TO OPERATE THE operation BOX OF LK
1) Setting the item data
Set each item following the procedure described below.
Setting of the
Setting of the X scale
pattern No.
1 Turn ON the power switch.
Pattern No. of the item selection lights up, and the pattern No. is indicated on the data display.
(Pattern No. 1 has been set at the time of delivery.)
2 Setting of the pattern No.
PATTERN No.
X SCALE
Y SCALE
SPEED
COUNTER
WINDER
SELECT
• Sewing LED
will be made as follows.
Pattern No. → X Scale → Y Scale → Speed → Counter → Bobbin winder
↑
Setting of the Y scale
FORWARD
BACK
−
• Reset key
• Data display
• Item selection LED
1) Press the
key to indicate the item "PATTERN
SELECT
No.".
2) Press the
or
FORWARD
screen.
(Pattern No. is set to 14.)
(Caution) For the pattern No. refer to the table of
the standard sewing patterns (p.12).
10
−
Setting of the max.
sewing speed limitation
key to indicate "
"on the
BACK
Advertisement
Table of Contents
