Table of Contents
Advertisement
3 Setting whether the calling of the pattern data is operative or not
By making inoperative the calling of the unnecessary pattern, this setting prevents the different pattern
from calling by mistake. Also, it is possible to call and use the necessary pattern.
1) After the memory switch has started, press the
indicate "
2) Press the
READY
Indication on A section : 0 : Pattern No.
Indication on B section : 0 : Calling is inoperative.
3) Press the
FORWARD
4) Press the
SELECT
5) Press the
FORWARD
6) After setting, register using the
(Caution) After operating the step 2), if the
setting will return to the state when the machine was
delivered.
3) Setting the counter operation
Example of setting : The production counter (adding counter) can be changed to the bobbin thread counter
(subtracting counter).
1) After the memory switch has started, press the
indicate "
2) Press the
READY
3) Press the
FORWARD
Indication on A section : 0 : Production counter
4) After setting, register using the
" on the display.
key to light up the sewing LED.
1 : Calling is operative.
key to make the indication on B " " → "
key to make the indication on A " " → "
key to make the indication on B " " → "
key.
READY
" on the display.
key to light up the sewing LED.
key to indicate "
1 : Bobbin thread counter
key.
READY
or
key to
FORWARD
BACK
".
".
".
key is pressed, the
R
RESET
or
key to
FORWARD
BACK
".
24
−
−
e
e
B
A
e
e
e
e
e
e
A
Advertisement
Table of Contents
