Install Decorative Glass Murano 2200Dgm - Valor LX2 Series Installation & Owner's Manual

Install Decorative Glass Murano 2200DGM

Material required
• Small container to distribute fi re glass (not supplied)
• Decorative Glass Murano kit, which contains:
◊ 1 bag of clear fi reglass
◊ 2-piece glass platform
◊ 8 ceramic pads
Installation
Carefully unpack the kit.
1. Install the 8 ceramic pads around the burner as indicated. The pads will raise the glass platform.
2. Install the front and rear glass platform, smooth side up, on the ceramic pads.
3. Carefully spread the fi reglass by hand on the surface of burner forming a single layer to the level of the top edge
of the fl ange around the burner. Do not pour from the bag to avoid fi ne particles blocking the burner ports..
NOTE: Ensure the areas within the pilot shield and pilot safe zone are clear of fi reglass.
Decorative Glass Murano installed
INSTALLATION
CHOKING HAZARD! Ensure that the fi replace
area is clear of fi reglass particles as these could
be ingested by small children. Vacuum area after
installation.
IMPORTANT: Approved for use only with the fi reglass
provided with your Valor fi replace The use of any other
fi reglass products may void your fi replace warranty.
WARNING
!
Pilot shield
Pilot safe zone
QUALIFIED
INSTALLER
51