Install Decorative Glass Murano 1103Dgm (1100 Models) - Valor 1100JN Installation & Owner's Manual

Install Decorative Glass Murano 1103DGM
(1100 models)
Material required
• Decorative Glass Murano kit, which contains:
•
1 glass platform
•
2 platform retainers
•
1 glass square
•
1 pilot cover
•
1 bag of clear 1/2" fi reglass
• Gloves (recommended to manipulate glass)
Installation
Carefully unpack the kit. Wear gloves to handle the
fi reglass.
1. Install the platform
retainers as indicated.
2. Place the pilot cover on
the ceramic burner over
the pilot shield.The lip on
the top surface goes to the
front.
3. Install the glass platform
on top of the retainers.
Installation
4. Carefully spread the glass on top of the burner
within the platform opening.
5. Install the glass square pad on top of the pilot
shield.
NOTE: Ensure the area within the pilot shield is
clear of glass particles.
lip in
front
IMPORTANT: Use only the fi reglass approved for
your Valor fi replace or the fi reglass brands Ameri-
can Fireglass™ or fi regear. Use of other fi reglass or
crushed glass can damage your fi replace and void
the warranty.
CHOKING HAZARD! Ensure that the fi replace
area is clear fi reglass particles as these could be
ingested by small children. Vacuum area after
installation.
Pilot area
WARNING
!
QUALIFIED
INSTALLER
57