Install Decorative Glass Murano 785Xdgm - Valor AutoFire G4 Installation Manual

Installation

Install Decorative Glass Murano 785XDGM

Material required
• Decorative Glass Murano Kit, which contains:
• 1 glass platform
• 1 glass piece for pilot cover
• 2 platform retainers
• 1 pilot cover
• 1 bag of clear 1/2" fi reglass
• Gloves (recommended to manipulate glass)
Installation
Carefully unpack the kit. Wear gloves to handle the
fi reglass.
1. Install the platform retainers
as indicated.
2. Place the pilot cover on
the ceramic burner over
the pilot shield. The lip on
the top surface goes to the
front.
3. Install the glass platform
on top of the retainers.
4. Carefully spread the glass by hand, on top of the
burner within the platform opening.
5. Install the square glass panel on top of the pilot
shield.
NOTE: Ensure the area within the pilot shield is clear
of glass particles.
lip in
front
IMPORTANT: Approved for use only with the fi reglass
provided for your Valor fi replace or fi reglass brands
American Fireglass™ or Firegear. Use of other fi reglass
or crushed glass can cause damage to your fi replace
and void the warranty.
WARNING
Choking Hazard! Ensure that the fireplace
area is clear of fireglass pieces as these
could be ingested by small children.
Vacuum area after installation.
Fuel Beds
Pilot area
23