GE HEALTHCARE
REV 9
Step
From previous page
DD MPH SYSTEM CABINET INSTALLATION
D Cabinet Positioning
A18
D Cabinet Securing
2 People
A19
D Generator Power Connection
D Line Voltage and Frequency:
Dependent Settings
D AC Voltage Supply for Buckies
*,
D XT
RS85 Power Supply*
1 Person
D Console Generator
A20
D PRINT−X Console (option)
D PROGRAM−X (option)
1 Person
Continues on next page
System Service Manual − SYSTEM COMPAX 40E, CE Marked
Description
INSTALLATION
2 Hours
CONFIGURATION
*
INSTALLATION
1 Hour
with MPH 50/65/80 (including XT, RS 85 and Tomo−Link)
Í Í
Mark each box when done
Í Í
Done
Supporting Documents
See Pre−installation Manual (Layout).
See SM MPH 50/65/80 dir. 2137354−100,
Chapter 1 Installation ; section 2,
Job Card IST002. Use Securing Kit (Part
2175309 provided with Upper Cabinet
REMARK:Verify PCB have not moved
during transportation, particularly the
Í Í
Power PCB in RAFL−S rack.
If the Wall Attachment Kit* is available, follow
instructions supplied with the Kit *(Part #
Refer to Inspection Report 2179651 TDR or
2167647 TDR, section 1.2 and 3.3
or
Inspection Report 2172166 TDR, section 1.2
and 3.4
See SM MPH Dir 2137354−100, Chapter 1,
Installation: section 2, Job Card IST002
WARNING
1. Refer to Inspection Report and/or to orange
Í Í
2. With MPH the XT is ALWAYS powered with
1 Hour
3. XT is shipped separately for the US.
Refer to Inspection Report 2179651 TDR or
2172166TDR or 2167647 TDR, section 1.1
See Pre−Installation manual (layout).
See SM MPH 50/65/80 dir. 2137354−100, Chapter 1
Í Í
Installation; section 2, Job Card IST002.
PRINT−X
Í Í
CAUTION: Ensure proper tightening of wire
connections and setting of connectors
21
DIRECTION 2154260−100
2164271, S16201EB)
MAINLY FOR USE IN THE USA:
labels fixed to the buckies
230VAC.
Default setting is 110V.
Refer to XT Service Manual Dir
2118733−100 for 220V setting.
Need help?
Do you have a question about the Compax 40E and is the answer not in the manual?