Installation Steering Guide - GE Compax 40E System Service Manual

GE HEALTHCARE
REV 9
1-3

Installation Steering Guide

Note: Read the following paragraphs carefully before continuing with this Steering Guide.
•
Pre−installation:
•
Inspection Report:
•
Steering Guide:
•
Clamping:
•
Pinning:
Data Base Backup:
Step Description
D Pre−installation Requirements
are met
A1
1 person
D Collect the Product Locator cards
in sequential order
A2
D Localize Installation Flowchart
2 people
Continues on next page
System Service Manual − SYSTEM COMPAX 40E, CE Marked
Pre−installation work is required to prepare the room for installing the
equipment. Check that this work is complete, if not, complete
pre−installation work now.
Some of the Steering Guide steps are factory performed. Refer to Inspection
Report Dir. 2167647 TDR, 2172166 TDR or 2179651 TDR(supplied with the
system) to know exactly which steps have already been performed.
Some steps of the Steering Guide refer to other Service Manual chapters.
When each task is performed, return to the Steering Guide and proceed with
the next step.
Do not forget to clamp the system cables for EMC compliance. Refer
to Job Card IST 005.
D To facilitate critical realignment on−site, several sub−assemblies are
pre−drilled and pinned or marked during factory integration. Refer to Job
Cards IST001, IST002, IST003 and IST 004 for installation procedures
D The Undertable configuration comes with several system cables
pre−installed in the Table Rolling frame. The remaining system cables are
pre−installed in the Tubestand assy. Take care not to damage these cables.
Performed by Manufacturing on Xamine Calibration Diskette.
START
CHECK
1 Hour
UNPACKING
4 Hours
with MPH 50/65/80 (including XT, RS 85 and Tomo−Link)
Í Í
Mark each box when task is done
Í Í
Done Supporting Documents
See PRE−INSTALLATION MANUALS
and LOCAL LAYOUT DATA Compax 40E CE, PIM
Dir. 2150306−100
Vertical Bucky Stand CE, PIM Dir 2150305−100 (SG100),
Í Í
Dir 2150301−100 (SG60)
Í Í
MPH50/65/80, PIM Dir 2133000−100
XT CE, PIM Dir 46−019618
RS 85 CE, PIM Dir 2172805−100
See section 1-2-3 of this manual.
Refer to Installation Flowchart for typical
main task durations
Í Í
Í Í
15
DIRECTION 2154260−100