GE HEALTHCARE
REV 9
Step
DD AEC CALIBRATION
D Processor ready and operational
A36
D Film/Screen characteristics defined
D Film Image Quality available
D AEC for Table Bucky Technique
A37
D AEC for Wall Bucky Technique
D AEC for Tomo Technique
2 People
DD SID SCALES
D XT Suspension
A38
D RS 85 Tubestand
D SG60/SG100
1 Person
System Service Manual − SYSTEM COMPAX 40E, CE Marked
Description
From previous page
FILM PROCESSING
CALIBRATION
6 Hours
POSITIONING
1 Hour
Continues on next page
with MPH 50/65/80 (including XT, RS 85 and Tomo−Link)
Í
Í
Supporting Documents
Done
NOTE: Film processor must be
fully operational at this stage to
proceed with AEC calibration.
Image quality tools (sensitometer,
Í Í
Í Í
See SM MPH 50/65/80, X−ray unit, Dir.
2137354−100, Chapter 1, Installation, Job
Card RG005.
Í Í
Í Í
2165897−100 (Chapter 1, section 4 and 5)
29
DIRECTION 2154260−100
etc.) must also be available.
XT: Refer to SM 2118733−100 Dir
46−019803, section 8.6
or Dir 2118910−100, section 12.6
RS−85: Refer to Interface SM
SG60: Refer to SM 2150293−100
SG100: Refer to SM 2150297−100
Chapter 1, section 9
Need help?
Do you have a question about the Compax 40E and is the answer not in the manual?