GE Compax 40E System Service Manual page 29

GE HEALTHCARE
REV 9
Step
DD
without
D Column Cables Wall Box
A7
D Tube Stand Rail
D Column With Carriage
D Tube Support Arm
D Counterweights
2 People
D X−ray Tube with Adapter
D Collimator Assembly
A8
D HV Cable Routing
2 People
System Service Manual − SYSTEM COMPAX 40E, CE Marked
Description
From previous page
RS 85 INSTALLATION
RS 85
with/without
with
INSTALLATION
INSTALLATION
H
Continues on next page
with MPH 50/65/80 (including XT, RS 85 and Tomo−Link)
Í Í
Í Í
Supporting Documents
Done
If present, RS 85 Tube Stand must be
installed first. Follow instructions given in
RS 85 PIM, Dir 2172805−100, Chapter 2.4
Refer to Inspection Report 2172166 TDR,
See SM− RS 85 Dir. 0327 7223
Mounting Instructions Chapter 1 Section
1.6.1 (Overall dimensions) and:
Chapter 2, Section 2.3 (Adjust floor rails)
Chapter 2, Section 2.4
Í Í
Í Í
Refer to Inspection Report 2172166 TDR,
See SM− RS 85 Dir. 0327 7223
Installation & Service Instructions
CAUTION: X−Ray Tube and Collimator are
factory aligned and assembled during HLA.
The mounting ring should be not be
adjusted during installation .
Í Í
Í Í
See Job Card IST003 of this manual
XXHrs
HANDLE with CARE (by the support only).
18
DIRECTION 2154260−100
sections 1.1 and 1.2
Chapter 2 sections 2.5 thru2.6
sections 3.1 and 2.1