Keypad Control - Vacon NX ACTIVE FRONT END II Applications Manual

68 • Vacon

7.10 Keypad control

3.1 Control place
The active control place can be changed with this parameter.
NOTE! Keypad is the default control place.
0 = PC Control, Activated by NCDrive
1 = I/O terminal
2 = Keypad
3 = Fieldbus
(4 = SystemBus)
On keypad control pressing Stop button more than a 2 second will open the MCB.
ID125
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
arfiff05 Standard AFE-II