Vacon NX ACTIVE FRONT END II Applications Manual page 20

20 • Vacon
V1.1.9 Supply Voltage
Input AC voltage, RMS line to line Volts. Updated when drive in run state.
Updates also when OPT-D7 is used.
V1.1.10 Unit Temperature
Temperature of the unit in degrees Celsius
V1.1.11 Status Word
Application Status Word combines different drive statuses to one data word.
b0
b1 Not in Ready state
b2 Not Running
b3 No Fault
b4
b5 Quick Stop Active
b6 Run Disabled
b7 No Warning
b8
b9
b10
b11
b12 No Run Request
b13
b14
b15
V1.1.12 DIN 645. 321
DIN1/DIN2/DIN3 status
B0 DIN1
B1 DIN2
B2 DIN3
B3 DIN4
B4 DIN5
B5 DIN6
V1.1.13 Analogue Input 1
V1.1.14 Analogue Input 2
Unfiltered analogue input level.
0 % = 0 mA / 0 V, -100 % = -10 V, 100 % = 20 mA / 10 V.
Monitoring scaling is determined by the option board parameter.
V1.1.15 Analogue Out 1
Analogue Output value 0 % = 0 mA / 0 V, 100 % = 20 mA / 10 V
V ID6
°C ID8
ID43
Application Status Word ID43
FALSE
Ready
Running
Fault
Quick Stop Not Active
Run Enable
Warning
Charging Switch closed (internal)
MCB Control (DO Final)
MCB Feedback
DO Charging Active
Run Request
ID15
% ID13
% ID14
% ID26
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
arfiff05 Standard AFE-II
TRUE