Vacon NX ACTIVE FRONT END II Applications Manual page 59

Arfiff05 Standard AFE-II
This parameter sets the time constant of the controller for the active current of the
regenerative unit (15 equals 1.5ms).
P2.6.7.8 Synch. Kp Start
P2.6.7.9 Voltage Control Kp
This parameter sets the gain for the DC link PI voltage controller.
P2.6.7.10 Voltage Control Ti
This parameter sets the time constant in ms of the DC link PI controller.
P2.6.7.11 Switching frequency
The switching frequency of the IGBT bridge in kHz. Changing the default value may
impact on the LCL filter operation.
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
ID1300
ID1451
ID1452
ID601
vacon • 59