Master Follower; Monitoring Values 2; Monitoring Values Description; Monitoring 1 Values - Vacon NX ACTIVE FRONT END II Applications Manual

Arfiff05 Standard AFE-II

5.1.4 Master Follower

Code Parameter
V1.4.1 SB SystemStatus
V1.42 Master CW

5.1.5 Monitoring values 2

Code Signal
V1.5.1 Measured temperature 1
V1.5.2 Measured temperature 2
V1.5.3 Measured temperature 3
V1.5.4 Measured temperature 4
V1.5.5 Measured temperature 5
V1.5.6 Measured temperature 6
V.1.5.7 PT-100 Temperature
5.2

Monitoring Values description

5.2.1 Monitoring 1 values

V1.1.1 DC-Link Voltage
Measured DC voltage, filtered.
V1.1.2 DC-Link Ref.
DC-Link voltage reference in Vdc.
V1.1.3 DC Voltage Ref.
Used DC Voltage reference in %
V1.1.4 DC Voltage Act.
Actual DC Voltage in %
V1.1.5 Total Current
Total current of the regenerative unit in Amperes, filtered
V1.1.6 Active Current
Active current in % of System Rated Current.
Negative value means that current is flowing to AC side from DC side i.e. regenerating.
V1.1.7 Reactive Current
Reactive current of the regenerative drive in % of System Rated Current.
Positive is Inductive current.
Negative is capacitive current.
V1.1.8 Supply Frequency
Supply frequency in ##.## Hz .The sign indicates the phase order. Updated when drive in
run state. Updated also in stop state when OPT-D7 is used or Regen Options B9 is
activated.
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
Unit Form.
Unit ID
Cº
50
51
Cº
Cº 52
Cº 69
Cº
70
Cº
71
42
Cº
Vdc ID44
Vdc ID25
% ID1200
% ID7
A ID3
% ID1125
% ID1157
Hz ID1
ID Description
1601
93
Description
4 s filtering.
4 s filtering.
4 s filtering.
4 s filtering.
4 s filtering.
4 s filtering.
Highest temperature of OPTB8/OPTBH board. 4 s
filtering.
vacon • 19