Vacon NX ACTIVE FRONT END II Applications Manual page 81

Arfiff05 Standard AFE-II vacon • 81
B09: FALSE = MCB Open command, TRUE = MCB closed command
MCB Open Command: Final command to open the MCB from application logic.
MCB Close Command: Final close command to MCB from application logic.
B10: FALSE = Main contactor Open, TRUE = Main contactor closed
MCB Open: Feedback from MCB, open.
MCB Closed: Feedback from MCB, closed.
B11: FALSE = Charge Control Open, TRUE = Charge Control Closed
Charge Control Open: Charging Contactor is not controlled.
Charge Control Closed: Charging contactor controlled closed.
B12: FALSE = No Run Request, TRUE = Run Request
No Run Request: Final Run Request command has not been given to motor control.
Run Request: Final Run Request command has been given to motor control.
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/